Click on the image to check the artwork
HiOSO Technology Co.,Ltd is one of the leading 8fe +1fx media converter manufacturers, equipped with productive factory, welcome to buy and wholesale 8 ports media converter, 8fe 100m + 1 fiber 100m media converter, 8rj45 100m + 1 sc 100m media converter products from us.
Overview
HiOSO FC690A is a kind of 10/100Mbps adaptive fast Ethernet fiber media converter (also called optical-to-electric medium converter) with a built-in eight-port 10M/100Mbps adaptive switch, which can implement mutual conversion between four independent 10Base-T/100Base-TX twisted pair electrical signal and 100Base-FX optical signal. FC690A can extend the transmission distance of a network from 100m over copper wires to 120 Km (single-mode full-duplex mode). It supports two different types of network connection medium types: 10/100Base-TX and 100Base-FX. With the application of the switching technology and the storing & forwarding technology, FC690A can implement data transmission between the two types of network connection media. This kind of converter supports transmission in dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fibers.
Features
Adaptive 10Mbps and 100Mbps environments, for the convenience of network upgrade;
Efficient built-in switching core, to implement flow control and reduce broadcast packets;
Providing eight independent 10/100Mbps adaptive switching-type twisted pair ports, to implement electrical interface backup and multi-user access;
Providing eight electrical interfaces based on VLAN switch setting, and supporting the connection of users from different units;
Supporting full-duplex and half duplex transmission modes and capable of automatic negotiation;
Supporting automatic crossing of twisted pair ports, for the convenience of system debugging and installation;
Supporting the transmission of extra-long packets (with the maximum length of 1552 bytes);
Supporting Quality of Service (QoS) and ensuring transmission of VoIP packets;
Supporting Spanning Tree Protocol (STP) to form a redundant network;
Low power consumption, low heat and capable of stable operation for a long period time;
Supporting multiple types of fiber ports such as dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode, expanding the requirements of users;
Application
10/100Mbps fast Ethernet long-distance transmission network
Technical Specifications
|
Parameter |
Specifications |
|
Access mode |
10/100Mbps |
|
Standard |
IEEE802.3 10Base-T Ethernet, IEEE802.3u, 100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control, IEEE802.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree |
|
Wavelength |
850nm/1310nm/1550nm |
|
Transmission distance |
Dual-fiber multi-mode: 2Km; |
|
Port |
Eight RJ45 interfaces: connected to STP/UTP category-5 twisted pair |
|
Conversion mode |
Medium conversion, storing and forwarding mode |
|
MAC address table |
I K |
|
Buffer space |
1Mbit |
|
Flow control |
Full duplex state: flow control; half duplex state: back pressure mode |
|
Delay |
9.6us |
|
Bit error rate |
<1/1000000000 |
|
MTBF |
100,000 hours |
|
LED |
POWER (power), FX LINK/ACT (fiber connection/action) |
|
Power |
DC5V/1A (external) |
|
Power consumption |
5W |
|
Operating temperature |
-10~55℃ |
|
Operating humidity |
5%~90% |
|
Storage temperature |
-40~70℃ |
|
Storage humidity |
5%~90% (non-condensing) |
|
Dimensions |
38mm(Height)*118mm(Width)*152mm(Depth) (external power) |
Ordering Information
|
Model |
Rate |
Mode |
Working Wavelength |
Transmission Distance |
Fiber Interface |
Power |
|
FC690AM-SC/ST |
10/100 |
Dual-fiber multi-mode |
1310 |
2 |
SC/ST |
External |
|
FC690AS20/40/60 -SC/FC |
10/100 |
Dual-fiber single-mode |
1310 |
25/40/60 |
SC/FC |
External |
|
FC690AS80/100/120-SC/FC |
10/100 |
Dual-fiber single-mode |
1310 |
80/100/120 |
SC/FC |
External |
|
FC690ASS20/40/60-SC |
10/100 |
Single-fiber single-mode |
1310/1550 |
25/40/60 |
SC |
External |
|
FC690ASS80/100/120-SC |
10/100 |
Single-fiber single-mode |
1310/1550 |
80/100/120 |
SC |
External DC5V/1A |